Free newsletter:
NDT promos & resources.
 


 

 
 
There are 0 items currently in your shopping cart
1 - 3 of 21
Next
Magnetic Particle >> Gauss Meters
Diverse Technologies : MF300H+
Magnetic Field Meter
 

MF300H+ Magnetic Field Meter

made for magnetic particle testing

The Diverse MF300H+ hand held, battery operated Magnetic Field Meter with its rugged stainless steel Hall effect probe is suitable for laboratory and workshop use.

The meter uses a membrane key pad and a digital display which makes it simple to operate but at the same time offers the ability to do complex measurements.

A wide range of settings and units can be set by the user together with a variety of measurement modes allowing the user to take magnetic measurements in most lab and industrial applications.

  • Auto zero can be requested at any time by the press of a single key.
  • Measurements of magnetic fields together with the selected units are displayed on the instrument.
  • Modes include average, absolute peak, bipolar peak and true RMS.
  • There is a built in data logger that can collect 100 samples in  the chosen measurement mode and at a selectable rate. The results can be viewed on screen or optionally downloaded via the serial RS232/USB interface. Software for use with the meter is provided with the serial/USB option which enables data to be saved and entered in spreadsheets.
  • There is a built in are mode for NDT magnetic test bench (MTB) work. The MTB mode switches the instrument to the correct range and mode and compares the field level with a pre-defined level, typically 2400 kA/m. If the field is below this then <LO> is displayed otherwise <OK>. The high current measurement mode allows calibration of the setup and measurement of the current in all the measurement modes.
  • The instrument will work to 250kA, typically found in aluminium smelting plant.

MF300H+ Features at a glance

  • Measures Average, Absolute Peak, Bipolar, peak and RMS magnetic fields.
  • User selects units of measurement.
  • Rugged stainless steel probe
  • Magnetic Test Bench mode
  • Built in data logger
  • Continuous bar graph display of level
  • Remembers previous settings
  • High current measurement mode
  • Auto power off, Auto Zero facility.
  • Meets ISO 9000 quality assurance requirements.
  • Fully calibrated and delivered with certification to NPL traceable standard.
  • Supplied with a protective carrying case and full user instructions
  • Used by NDT and welding shops worldwide
Shipping: 4 lbs. 14x12x4 in.

 

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

MF300H+

MF300H+ Kit with tangential field probe, manual, carrying case.

MT-DT-MF300H+

$1,395.00

USB

RS232/USB Port, cable and software option.

MT-DT-MF300H-USB

$255.00

Magnetic Particle >> Gauss Meters
Diverse Technologies : MF300B+
Magnetic Flux Meter
 

 MF300B+ Magnetic Flux Meter

Measures flux inside the test piece!

Most magnetic field meters and gauss meters measure the level of magnetism outside of the components under inspection. Yet it is the value of the magnetic flux density within components which determine whether or not Magnetic Particle Inspection can be successfully carried out.

The MF300B+ Magnetic flux meter provides a quantitative measurement of the magnetic flux inside steel.

The unique probe extracts a sample of flux from the surface under inspection and displays the peak flux in mT, Tesla or Gauss.

The probe of the MF300B+ can be placed on the required surface to measure the flux density in any direction.

The monitor will measure constant or alternating magnetic flux which can be produced by permanent magnets, electromagnets or electric currents. The measured value is displayed in units of Tesla.

Measurements of magnetic flux are displayed on the unit and can also be sent via optional RS232 or USB link to a P.C. Software for use with the meter is provided which enables data to be saved and entered in spreadsheets.

Feature summary:

  • Measures Peak Magnetic Flux Density
  • Uses unique Magnetic Flux probe.
  • Auto zero before every reading.
  • Use with constant or alternating magnetisation.
  • RS232 output for computer connection.
  • Meets BS 5750/ ISO 9000 quality assurance requirements.
  • Fully calibrated and delivered with certification.
  • Supplied with a protective carrying case and full instructions.

shipping: 5bs. 14x12x4 in.

 

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

MF300B+

MH300F+ Flux Meter kit with probe, case, manual

MT-DT-MF300B+

$1,795.00

Magnetic Particle >> Gauss Meters
Kowolux : Berthold
Magnetic Penetrameter
 

Berthold Penetrameter

The Berthold Penetrameter is designed to indicate flux direction and sensitivity.The central piece is cut into quadrants to provide indications at 0 and 90 degrees. This piece is capped with a thin non-magnetic foil that is mounted in an adjustable spacer, allowing the test surface to be raised as a means of judging sensitivity.

 

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

Berthold

Berthold Gauge

MT-KW-Berthold

$395.00

Next   
1 - 3 of 21

top